Call Today: 781-396-5279
PROUDLY SERVING MA, CT, RI & NH

Medford Wellington Service Company

Rated 5.0 out of 1 reviews

Nashua NH Commercial and Residential Services

Nashua NH Commercial and Residential Services 2018-05-24T17:02:06+00:00

Medford Wellington provides a variety of services to commercial and residential clients in Nashua, NH, including heating, air conditioning, refrigeration, sheet metal, plumbing and electrical services.

We pride ourselves in being your most trusted contractor in Nashua, NH. Just read our reviews to see why your neighbors trust us with their comfort services.

Local Reviews
for Nashua, NH

Our Reviews by City



Nathan  C.

Nathan C.

Refrigeration call for a Randell sandwich unit. Replaced compressor and txv. Call is complete.

Near Amherst St, Nashua, NH 03063
Karl  P.

Karl P.

HVAC Service call. Preventative Maintenance service completed per contracted agreement. All requirements per seasonal obligations have been met. Any issues found during PM service have been brought to the attention of the appropriate personnel and have been defined as either a critical or a non-critical issue for their review. HVAC call is complete.

Near Amherst St, Nashua, NH 03063
Anthony  D.

Anthony D.

HVAC Service call. Preventative Maintenance service completed per contracted agreement. All requirements per seasonal obligations have been met. Any issues found during PM service have been brought to the attention of the appropriate personnel and have been defined as either a critical or a non-critical issue for their review. HVAC call is complete.

Near Daniel Webster Hwy, Nashua, NH 03060
Landon  M.

Landon M.

HVAC Service call. Preventative Maintenance service completed per contracted agreement. All requirements per seasonal obligations have been met. Any issues found during PM service have been brought to the attention of the appropriate personnel and have been defined as either a critical or a non critical issue for their review. HVAC call is complete.

Near Amherst St, Nashua, NH 03063
John  H.

John H.

Refrigeration call. Door replacement on refrigerator. Removed old door and replaced with new door. Had to fabricate bracket to hold bottom hinge secure because the stainless steel frame was pulled away from the unit. Causing bottom hinge to sag. Door now operational. Call is complete.

Near Amherst St, Nashua, NH 03063
Brian  C.

Brian C.

HVAC Service call. Preventative Maintenance service completed per contracted agreement. All requirements per seasonal obligations have been met. Any issues found during PM service have been brought to the attention of the appropriate personnel and have been defined as either a critical or a non critical issue for their review. HVAC call is complete.

Near Gusabel Ave, Nashua, NH 03063
Mark S.

Mark S.

HVAC Call.RTU 3 Replaced condenser fan motor 1 and 4 and the bladesRTU#2 Replaced stage 2 draft indused motor from right side heat exchanger and the S10 limit switch and k13 relyRTU #4 Replaced 2 cond fans, blades & caps for fan #2 & #4RTU #1 Replaced #4 & #2condenser fan motor, blade & capacitor, out of balanceRTU #6, i replaced condenser fan motor #2 fan motor , blade, and capasitor

Near Daniel Webster Hwy, Nashua, NH 03060
Nathan  C.

Nathan C.

Refrigeration call. Arrived and checked in. While on site for gaskets I began to temp out salad reach-in refrigerator. Condenser had been previously cleaned on our last visit. Reach in temped at 43 degrees. When inspecting box I found a plastic bag blocking evaporator and multiple food product that would contribute to blocking air flow. I removed food product in reach-in and adjusted temp control to coldest setting. Condensing unit kicked on after removing some product and compressor satisfied when box hit 34 degrees. Food product placement must be monitored in reach in when they suspect reach in running warm. Keeping reach in product spaced out is essential for proper air flow. Refrigeration call is complete.

Near Daniel Webster Hwy, Nashua, NH 03060
Sandra  L.

Sandra L.

Preventative Maintenance service completed per contracted agreement. All requirements per seasonal obligations have been met. Any issues found during PM service have been brought to the attention of the appropriate personnel and have been defined as either a critical or a non critical issue for their review. HVAC call is complete.

Near Amherst St, Nashua, NH 03063
Anthony  D.

Anthony D.

Checked in with the MOD and was shown to the unit and found that the unit was running but there was ice on the evaporator coil. I defrosted the coil with hot water and then turned the unit back on and took an assumed superheat reading and found that my superheat was too high. I attached guages and found that the unit was running low on charge, I was able to charge the unit up and began running with much improved head and suction pressures along with a better superheat and subcooling reading. I performed a cursory leak check using an electronic leak detector and did not get any solid hits, I reached out and got approval to install permanent access port and perform a more in depth leak check. I didn't find any leaks so I changed the filter drier and installed the access ports, I pressurized the system with nitrogen to 325psi and had no pressure drop, I will add leak dye to help us find the leak if the unit has a charge issue in the future. Unit is operating properly and has pulled down t

Near Daniel Webster Hwy, Nashua, NH 03060
Anthony  D.

Anthony D.

Checked in with MOD G upon arrival. Created gasket list. Went through list with chef. Placed order for gaskets. Call is complete.

Near Daniel Webster Hwy, Nashua, NH 03060